Steam autoclaves/sterilizers GC (Russia)

Steam sterilizer GK-20 (stand-alone, medical)

 

The GK-20 steam sterilizer is designed for steam sterilization of medical products made of textiles (bandages, gauze, clothes), metals (surgical and dental instruments), heat-resistant rubber, glass (syringes, dishes). Steam sterilizer GK-20 is an analogue of sterilizers GK-25-2, BK-30-01, withdrawn from production in 2014 and 2015. IT can be used as a sterilizer for manicure tools in beauty salons and hairdressing salons.

 

Steam sterilizer (autoclave) GK-20 is currently the most attractive in terms of price/quality ratio in its segment. Its main advantage over peers is the freely programmable mode and autonomy of the sterilizer, which allows it to be installed in small rooms with no water supply and sewage. You just need to pour distilled water, which should be periodically changed to prevent the formation of scum on the heating elements. In addition, four of the most common sterilization modes are already pre-set on it, allowing you to quickly switch to sterilization of different requirements of the objects to be sterilized. The vacuum dryer model with pre-vacuum is in the process of being put into series production by the manufacturer.

 

 

 

Technical parameters

 

 

 

Characteristic Parameter

Type Table

Overall dimensions, (w, h, d), mm 490x400x700

Stand-alone Yes

Vacuum drying Yes

Consumed power, kW 1,5

Current consumption 220 V, 50 Hz

Sterilization modes 0,11 MPa - 121/20-45 °C/min, 0,14 MPa - 126/10-30 °C/min, 0,20 MPa - 132/20 °C/min, 0,21 MPa - 134/5-20

Air Removal Gravity Control

Control automatic

Chamber dimensions, mm 557õ213 (depth, diameter)

Nominal volume of the chamber, l 20

Weight, kg 45