Electronic thermometer LT-300-H-TC

Purpose of the electronic laboratory thermometer LT-300-N-TC:

Electronic thermometer LT-300-N-TC can replace most of the "mercury" for the temperature range from -50 to +300 ° C. A miniature platinum sensor in a thin-walled metal casing allows you to measure the temperature with high accuracy and a short response time to its changes. The LT-300-N-TS is characterized by extremely low power consumption and is powered by two standard AAA batteries, one set of which lasts for one year of continuous operation.

 

LT-300-N-TS can be connected to a computer for calibration and transfer of measurement results.

 

Features of the electronic laboratory thermometer LT-300-N-TC:

Measuring range -50...+300 °С;

Resolution 0.01 °С, accuracy of ±0.05 °С;

Stainless steel sensor is not designed for measurements in corrosive environments. High temperature cable withstands temperatures up to +200 ° C;

High accuracy, excellent repeatability and excellent long-term stability;

Easy to read read readings;

Low power consumption, supplied with two standard AAA batteries;

Reliable and usable: electronic thermometers are not as easy to damage as glass ones. Even if it can be done, there is no problem with the disposal of mercury;

Can be connected to a personal computer to set up a temperature measurement system. The standard connection to the computer is made through a serial port to connect via USB interface requires an adapter LT-300-A.

Constructive features of the electronic sensor laboratory thermometer LT-300-H-TC:

The case is made of stainless steel 12X18H10T;

Sensitive element - Pt1000 with individual calibration;

Standard length of the submersible part - 240 mm, can be manufactured with the length of the submersible part from 90 to 550 mm;

Inseparable connection between the submersible sensor and a temperature-resistant cable that can withstand temperatures up to +200 °C and the maximum possible cable length of 2 m;

Not suitable for measurements in aggressive environments.

Connection to a computer of the electronic laboratory thermometer LT-300-N-TC:

The built-in serial interface allows the thermometer to be connected to a personal computer.

 

The ThermoChart software allows you to record and save temperature measurement results in the form of graphs and tables. It is also easy to calibrate the thermometer using this software.

 

With its low time constant, excellent resolution and accuracy, the LT-300-H-TC combined with ThermoChart is a good tool for building temperature measurement systems, such as calorimeters.

 

The standard connection to a computer is via a serial port. An adapter LT-300-A is required to connect via USB interface.

 

Note form when ordering an electronic laboratory thermometer LT-300-H-TC:

LT-300-H-TS

 

- in millimeters from 90 to 550, for the sensor of standard length 240 mm can be omitted.

 

Ordering example:

 

LT-300-120H-TC - thermometer with stainless steel sensor of 120 mm length and heat-resistant cable.