Stationary thermohygrometer IVA-6B2 (Russia)
Thermohygrometer IVA-6B2 is designed to measure relative humidity and air temperature in residential, warehouse and industrial premises, in free atmosphere, as well as to measure the moisture content of non-aggressive process gases.
Thermohygrometer in a panel version with remote measuring transducers. it is similar in capabilities to the IVA-6B thermohygrometer , but has a two-line display and the ability to connect up to four DV2TSM humidity/temperature transducers of various designs and pressure simultaneously. To connect the converter DV2TSM-3T-1P-A-K, DV2TSM-4P-V - version of the display unit IVA-6B2-K
Scopes of IVA-6B2 :
- measuring the parameters of the microclimate of industrial premises and testing laboratories, warehouses;
- control of microclimate parameters in clean industrial premises of the pharmaceutical and electronic industries;
- air humidity control in the printing industry;
- humidity control in proofers at bakeries;
- sausage drying chambers;
- textile industry;
- nuclear power plant safety systems;
- ventilation and air conditioning systems for buildings and structures, meteorological observation systems;
- equipment for drying air and process gases, incl. deep drying;
- control of drying processes, storage of products.
- The IVA-6B2 thermohygrometer consists of an indication unit and humidity and temperature measuring transducers of the DV2TSM type.
- The LED display of the thermohygrometer simultaneously displays the current values of temperature and air humidity of the measured channel.
- Presentation of the measured value of gas humidity in different units: relative humidity (%), mass concentration of moisture (g/m 3 ) and dew/frost point (ºС).
- The converters are connected in parallel with a common two-wire cable via the digital interface m ForLAN to the ModBus protocol with a total length of the communication line up to 300m.
- Up to 4 measuring channels can be connected to the thermohygrometer indication unit, each of which can include a humidity and temperature measuring transducer DV2TSM (device network numbers from 1 to 4).
- Availability of two relay outputs (5A, ~220V) with programmable thresholds for a given measuring channel.
- If the thermohygrometer has several measuring channels, you can configure the relay output to work on one of them or on several at once. When the relay output operates with several measuring channels, the relay can be actuated by logical "AND" or by logical "OR".
- Possibility to install two galvanically separated current outputs (0-5 or 4-20 mA) or digital output (RS232 or RS485) with MODBUS exchange protocol.
When ordering an IVA-6B2 thermohygrometer , the configuration of the display unit, the type and number of humidity transducers DV2TSM, and the length of the cables are specified.
Designation of the thermohygrometer indication block: IVA-6B2 -X, where X - type of output signal:
T5 - two current outputs 0-5 mA;
T20 - two current outputs 4-20 mA;
RS232 - digital output RS232;
RS485 - RS485 digital output.
Designation of the humidity and temperature transmitter:
| 1 | 2 | 3 | four | five | 6 |
| DV2TSM | -X | -X | -X | -X | -X |
1 - Trademark of the transducer.
2 - Execution according to the operating temperature range (1T, 2T, 3T and 4T).
3 - Execution according to the permissible basic absolute error of relative humidity measurement (1P, 2P and 3P).
4 - Design (A, B or C).
5 - Type of protective cap:
II - stainless steel openwork with a porous cap made of fluoroplast (pores about 1 micron);
III - porous from sintered stainless steel (pores about 25 microns).
6 - length of the connecting cable, m.
As standard, the instrument is supplied with one DV2TSM-1T-1P-B/080 transducer.
An example of thermohygrometer designation when ordering:
IVA-6B2-RS232 with converter DV2TSM-1T-1P-A-III
IVA-6B2 thermohygrometer with RS232 digital output according to ModBus protocol, with DV2TSM-1T-1P-A-III converter (operating temperature range from 0 to 60°С, limit of permissible basic absolute error of relative humidity measurement ±2%, design version A with porous stainless steel protective cap), with a 4 m connecting cable.
- The IVA-6B2 thermohygrometer consists of an indication unit and humidity and temperature measuring transducers of the DV2TSM type.
- The LED display of the thermohygrometer simultaneously displays the current values of temperature and air humidity of the measured channel.
- Presentation of the measured value of gas humidity in different units: relative humidity (%), mass concentration of moisture (g/m 3 ) and dew/frost point (ºС).
- The converters are connected in parallel with a common two-wire cable via the digital interface m ForLAN to the ModBus protocol with a total length of the communication line up to 300m.
- Up to 4 measuring channels can be connected to the thermohygrometer indication unit, each of which can include a humidity and temperature measuring transducer DV2TSM (device network numbers from 1 to 4).
- Availability of two relay outputs (5A, ~220V) with programmable thresholds for a given measuring channel.
- If the thermohygrometer has several measuring channels, you can configure the relay output to work on one of them or on several at once. When the relay output operates with several measuring channels, the relay can be actuated by logical "AND" or by logical "OR".
- Possibility to install two galvanically separated current outputs (0-5 or 4-20 mA) or digital output (RS232 or RS485) with MODBUS exchange protocol.
When ordering an IVA-6B2 thermohygrometer , the configuration of the display unit, the type and number of humidity transducers DV2TSM, and the length of the cables are specified.
Designation of the thermohygrometer indication block: IVA-6B2 -X, where X - type of output signal:
T5 - two current outputs 0-5 mA;
T20 - two current outputs 4-20 mA;
RS232 - digital output RS232;
RS485 - RS485 digital output.
Designation of the humidity and temperature transmitter:
| 1 | 2 | 3 | four | five | 6 |
| DV2TSM | -X | -X | -X | -X | -X |
1 - Trademark of the transducer.
2 - Execution according to the operating temperature range (1T, 2T, 3T and 4T).
3 - Execution according to the permissible basic absolute error of relative humidity measurement (1P, 2P and 3P).
4 - Design (A, B or C).
5 - Type of protective cap:
II - stainless steel openwork with a porous cap made of fluoroplast (pores about 1 micron);
III - porous from sintered stainless steel (pores about 25 microns).
6 - length of the connecting cable, m.
As standard, the instrument is supplied with one DV2TSM-1T-1P-B/080 transducer.
An example of thermohygrometer designation when ordering:
IVA-6B2-RS232 with converter DV2TSM-1T-1P-A-III
IVA-6B2 thermohygrometer with RS232 digital output according to ModBus protocol, with DV2TSM-1T-1P-A-III converter (operating temperature range from 0 to 60°С, limit of permissible basic absolute error of relative humidity measurement ±2%, design version A with porous stainless steel protective cap), with a 4 m connecting cable.
Read together with it:
- Disposable nitrile gloves (packing 100 pieces)Nitrile gloves textured on the fingers, powder-free for one-time use as a protective barrier when worn on the hands. They are mainly used as a two-sided barrier for protection. Texturing on the fingers provides a secure grip on the surface. Hypoallergenic due to the absence of natural latex. Powder free to reduce the risk of contact dermatitis. The shape of the glove is flat, without division into...
- Luminometer PureTrust MF1000PremiumATP-based sanitation technology is a quick and easy-to-apply method for checking the sanitation of surfaces on equipment, inventory, etc. These tests can provide an objective and measurable assessment of the cleanliness of equipment and surfaces prior to production. In addition, the results of sanitary control allow you to perform the necessary corrective actions in real time. PureTrust MF1.........
- Luminometer PureTrust Model MF2000ATP-based sanitation technology is a quick and easy-to-apply method for checking the sanitation of surfaces on equipment, inventory, etc. These tests can provide an objective and measurable assessment of the cleanliness of equipment and surfaces prior to production. In addition, the results of sanitary control allow you to perform the necessary corrective actions in real time. PureTrust Model MF2....
- Sticky fly trap, 25cm*10mSticky trap to control flies and flying insects. Sticky fly trap: how to use and what benefits it has Flies are not only unpleasant insects that can cause discomfort in the house, but also carriers of diseases. Sticky traps can be used to get rid of them. In this article, we will discuss the benefits of sticky fly traps and how to use them correctly. Benefits of a sticky fly trap The sticky fly tr...
- Foam cup for udder treatmentFoam cup for udder treatment: an effective tool in the fight against mastitis Mastitis is one of the most common diseases in cows and other dairy animals. it causes inflammation of the udder and can lead to significant MILK loss and even death of the animal. One way to combat mastitis is to use a foam cup to treat the udder. In this article, we will talk about the advantages and disadvantages of s...
- Disposable udder wipe (udder paper).A disposable udder wipe is one option that can be used to protect cows' udders from infections. This napkin is made of paper and is intended for single use. Benefits of using disposable udder wipes: 1. Hygienic - disposable wipes guarantee maximum hygiene, as they are used only once and then thrown away. 2. Ease of use - disposable wipes are easy to use and require no extra effort to clean up ...
- Milk filter for fine purification of milk for 2, 5, 10 tonsThe MILK fine milk filter is a special device that is used to remove microorganisms and other contaminants from milk. it is an essential element in the production of high quality dairy products. The fine milk filter works on the principle of mechanical and chemical filtration. It consists of several layers of material that trap microorganisms and other contaminants. Materials for fine milk filters...
- Milk filters - primary cleaningMILK is one of the most important food products used in various food industries. However, before milk can be used as an ingredient in food production, it must first be purified. For this, special filters for milk are used. Milk filters are devices that are designed to remove various impurities from milk, such as mechanical impurities, bacteria, viruses and other microorganisms. This allows you to ...
- The work of the agro-industrial complex of the Tarnoga district was evaluated by the Deputy Governor of the Vologda region Mikhail GlazkovThe Okrug has strong farms with positive results and high potential for further development. The number of cows in agricultural organizations is almost 2.5 thousand (+2.5% by 2021). Gross MILK production is 17,717 tons (+4.4%) The productivity level of cows in agricultural organizations of the Tarnoga district for 2......
- Indicator strips "Chloride-500 mg", 100 pcsIndicator strips "Chloride-500 mg", are designed for semi-quantitative determination of the concentration of chloride in water and aqueous solutions. This test is completely ready to use and does not require additional reagents and equipment. A simple test procedure provides a reliable result in 6 minutes. ......